2021.10.22 00:09 Fades4Dayz Wouldn't it be cool if we got Nicktoons Unite 5? i bet ludosity could help THQ make it come true since we've been getting alot of nickelodeon games lately.
|submitted by Fades4Dayz to AllStarBrawl [link] [comments]|
2021.10.22 00:09 SafinJade How to be friends after
So it ended cause he still had some sort of feelings for his ex and wasn’t over the past relationship (it was a bad one and she treated him badly). He thought he was ready for a relationship so we dated but turns out he wasn’t and he just couldn’t do it. At first it was supposed to be a break because he told me he was sure about his feelings for me and that he saw a future w me once he worked out his issues. But then everything flipped really quickly and there are a lot of mixed signals. Unfortunately I can’t wait for “I dont know” and I honestly believe that he doesn’t want anything romantic with me anymore, forever. But we still text everyday and he wants to be friends and the truth is I think the world of him. He’s such a good person and we just get along so well. I think he deserves the best. I want to be his friend too and I’ve been trying but it’s hard to act like I’m not in love with him. It’s like I’m putting on a mask even though I feel sad and wish he’d realize that we deserve another shot when he’s ready. So asking for those who kept contact after. How are you friends with someone you’re in love with, but they’re happier without you as their gf? How do you get past it?
submitted by SafinJade to BreakUps [link] [comments]
2021.10.22 00:09 Ed-splosion How do you feel about Gypsy Cabs/Taxis/Drivers? Justified legal carjacking?
With many cab drivers participating in a hunger strike against the city over debt caused by medallions, the Taxi and Limousine Commission (TLC) is drawing a lot more public attention
For those that are unaware, gypsy cabs refer to people who do car service without a TLC (Taxi Limousine Commission) license. This is technically illegal and the TLC does everything they can to stop it.
This is where it gets dicey. The TLC has some ruthless methods in dealing with these drivers. In my POV, TLC is runned like a mob. The reasons for this are not limited to the price of their medallions.
2021.10.22 00:09 rafitagrazzolo Latin Brazilian House Mix
i invite you to enjoy my latest mix, great to listen near the beach with some beers and friends. if you like it, please let me know
submitted by rafitagrazzolo to DJSets [link] [comments]
2021.10.22 00:09 HandsomeJack700 Dio going to arby's
|submitted by HandsomeJack700 to ExpandDong [link] [comments]|
2021.10.22 00:09 DiameterJuice Just Beast Machines Silverbolt in general.
|submitted by DiameterJuice to Cursedformers [link] [comments]|
2021.10.22 00:09 chevyaurora [SELL] [US] [EUC] Chase the Chill long sleeve deep fuschia. Size 6. $55 plus shipping and fees
|submitted by chevyaurora to lululemonBST [link] [comments]|
2021.10.22 00:09 do_you_even_ship_bro San Diego judge denies lawsuit seeking to block ghost gun ordinance
2021.10.22 00:09 IrishRed679 Ender 3 Pro with 4.2.7 MB and CR Touch - leveling issues
| I have an Ender 3 Pro and just upgraded from an 8-bit motherboard to a 32-bit motherboard (4.2.7) and figured I would add in a CR Touch for automatic bed leveling (ABL). Followed the videos and set the Z-offset (-0.475) and tested it numerous times. Did a manual bed adjustment with paper and the bed is fairly level. I am running a newly compiled version of the Marlin 2.0 bugfix firmware.|
When I do a 9-point leveling with CR Touch, my values on the right side of the bed are totally out of spec. Consequently, when I print a bed level testing routine the nozzle is not close to the bed and it does not stick. I have repeated the process numerous times, setting the z-offset etc, and get the same results. My prints not sticking makes sense based on these ABL values, but why are the values so far out of range when I am not seeing similar results with manual bed leveling?
At this point, I removed any ABL from my print routine in Cura and am just using G28 (no G29 for ABL) and my prints work just fine, but I am frustrated for purchasing a CR Touch to fine tune my bed and I cannot even use it.
Wondering if my Z-axis is out of spec/loose and this is causing the issue? If I cannot rectify, I'll probably just unplug the CR touch and go back to the Z-axis switch.
Appreciate any input or thoughts you may have on this one. I just started printing a couple of months ago, so I am relatively new.
submitted by IrishRed679 to ender3 [link] [comments]
2021.10.22 00:09 fatbuddha66 Just got the parts for my first mod
|submitted by fatbuddha66 to SeikoMods [link] [comments]|
2021.10.22 00:09 rentAbuddy Is there an app to keep track of the schedules and current record of favorite sports teams in several leagues/sports?
For instance, one app that will let me pick my favorite team(s) in the NHL, NFL, MLB, and NBA where I can see when their next game is at a glance, what their current record or standing in the league is, etc. Thanks.
submitted by rentAbuddy to androidapps [link] [comments]
2021.10.22 00:09 Synthium- Tarinja: Invasion- indigenous speculative fiction - available on Kindle unlimited
The rest of the world has been taken over by the Invaders, hulking armoured cyclopes who appeared out of nowhere. Tarinja is one of the few survivors, his tribe managing to survive in their ancestral caves deep in the desert. His father, Two-bob is a powerful ngangkari, a keeper of lore of the tribe, who believes the answers to their salvation lies in the ancient knowledge of their ancestors. However when the Invaders draw nearer, the tribe can no longer hide and Tarinja must seek the answers they need. Meanwhile Samuel, a trans man and his cisgendered brother Flynn head north, seeking other survivors to band with. Their journey's entwine as they learn the truth of the Invader's origins in the quest to save their people, the oldest living civilisation on earth.
Tarinja: Invasion is a Aboriginal Apocalyptic speculative fiction book which draws on the stories of Central Desert tribes of Australia and incorporates the Indigenous languages of Arrernte and Walpiri.
Trigger warning- It explores the topics of intergenerational trauma, colonisation, cultrual identity and gender identity.
[Tarinja: Invasion](Tarinja: Invasion https://www.amazon.com/dp/B09JYNH1N1/)
submitted by Synthium- to wroteabook [link] [comments]
2021.10.22 00:09 Cold-Illustrator-293 [LF] spooky recipes: Carriage, Garland, Table Setting, Wand [FT] spooky recipes: trick lantern, tree, arch table, chair, fence, scarecrow
2021.10.22 00:09 ZoobBot 181526
2021.10.22 00:09 Ok_Government6871 Do some companies deliberately start drama in the work environment?
My past job the managers would never train me and then use that as justification for not promoting me. Then promote the people who’d show up high everyday. I’ve asked several times to be trained in certain areas and they’d make excuses like they don’t have time. Then they cut my hours to 20 after had been there for 9 months and gave the new guy 40 and whenever I tried to say anything they’d turn the issue around on me and said I was starting drama
submitted by Ok_Government6871 to work [link] [comments]
2021.10.22 00:09 Kevin-W Ron's Gone Wrong was a cute and funny animated movie!
I wasn’t sure what to really expect going in, but I had a lot of fun watching it! Yes, the plot is predictable, but overall I thought the movie was cute and it gave me some laughs too.
submitted by Kevin-W to AMCsAList [link] [comments]
2021.10.22 00:09 Unholyfroggod Payment method
2021.10.22 00:09 Udy_Kumra Fun and action-packed space opera with decent characters
Basically I would like to read something that is sort of the Brandon Sanderson of space opera. Something with decent enough characters with arcs, but they don't have to be the best characters in the history of the genre. Something fun and action packed with some cool exploration of unique worldbuilding concepts. Great setpieces and endings.
Specifically I think it would be fun to have a story about a quirky crew of some sort that goes on space adventures. Kind of like how Star Wars: A New Hope feels at times, with Luke and Han and Chewie and Obi-Wan and C3PO and R2 traveling the galaxy, battling Stormtroopers and saving princesses. Bonus points for female characters in prominent roles in the book.
I have read Sanderson's space opera, Skyward, as well as The Expanse and some of the Murderbot books (The Expanse is similar to what I am looking for, though I would like softer sci-fi than that, while Murderbot—while AMAZING—is more character-driven than what I want here).
submitted by Udy_Kumra to Fantasy [link] [comments]
2021.10.22 00:09 SuperPanda_Punch Do you ever just stare at your weed and admire it. This shit is beautiful
|submitted by SuperPanda_Punch to weed [link] [comments]|
2021.10.22 00:09 MugShots DPS Alert
2021.10.22 00:09 SilverLantern2814 I new Alec had a temper on set, but damn.
|submitted by SilverLantern2814 to dankmemes [link] [comments]|
2021.10.22 00:09 streamjuice 😇
2021.10.22 00:09 Clock-Full That's weird
|submitted by Clock-Full to LeopardsAteMyFace [link] [comments]|
2021.10.22 00:09 TheLockbox12 IDK If this is rare or not but.....
|submitted by TheLockbox12 to roblox [link] [comments]|
2021.10.22 00:09 AdEducational3375 (Sytrus) Copy operator 1 settings to operator 2
| Is there a way to apply the settings from operator 1 to operator 2? By settings, I mean the same shape, tension, skew, envelopes, LFO's, etc. |
I read that there is one way, but that requires copying and pasting. I'm not certain what I should copy and paste, or how efficient that would be. Thanks.
submitted by AdEducational3375 to FL_Studio [link] [comments]